Dimensions 6" x 18", weights 0.5 lb.
25 slots with parallel sides for more rigid holding, 0.125" x 0.300 on a 0.625" pitch.
High temperature conductive model for bare board processing tolerates acids, alkaline and solvents
Tolerates 185oF
ESD-SAFE
Double wide models expand to hold boards up to 24" wide with a carrying handle
RA-18SDG Green static dissipative material for lead-free boards
RA-18CL Clean Room material and Static-Dissipative

RA-18C	Black Standard Conductive (185ºF)
RA-18CT	Black High Temp Conductive (275ºF)
RA-18HT	Black Very High Temp Polysulfone (275ºF) Non-ESD
RA-18CTD	Black Double Wide Conductive High Temp
RA-18HTD	Black Double Wide, Very High Temp.
RA-18CD	Double Wide/ Standard Temperature ESD-Safe
RA-18C/SMT	Blue For those boards with components near the edge; slot size .075" x .125" on .500" pitch
RA-18CL	Blue Cleanroom material and static-dissipative
RA-18SDG	Green Static dissipative material for lead-free boards

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Model RA-20

Regular price $25.80

Shipping calculated at checkout.

Our largest universal rack available

20 Slots with easy-to-load angle(.125” W x .325” D on a .750” pitch)
Measures 7” x 20”, weighs 2 lbs.
Open carrying handles and stackable.
Tolerates 185oF
ESD SAFE
Molded in tough, reinforced, conductive material that meets Mil-Spec #B-81705-B for static discharge

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Adjustable Racks: Magazine Rack BG Series

Adjustable Racks: Magazine Rack BG Series

Regular price Sale price $160.00

Shipping calculated at checkout.

MAGAZINE RACK BG SERIES

PCB Magazine Rack is made of volume conductive polypropylene and metal

Gear adjusting card guides on some models to monitor parallelism and simplify set-up
Metal top and bottom on some models
Zero flexing of card guides with steel reinforcing supports and molded ribs
Standard ABS model (N) tolerates 80ºC, plus optional models to 200ºC
Surface resistivity of 10-4 to 10-6 ohm/cm
Removable end stop
Slot size is 5mm (.196")
Carrying handles on top and bottom
Assembly Instructions included
Transport Dolly available

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Angle Rack Model PCBH

Regular price $22.00

Shipping calculated at checkout.

ANGLED RACKS FOR PCB BOARDS

Economical Rack with ESD Protection with no adjustment required for handling clinched, soldered, or bare boards.
Standard Angled-Racks are molded in tough, reinforced, conductive material that meets Mil-Spec #B-81705-B for static discharge.
Holds boards on two contiguous edges.
Dimensions 10” W x 8” L x 4” H
25 Slots with easy-to-load angle, 0.125" W x 0.200” D
Drainage holes for use in cleaners
Tolerates 185oF
ESD SAFE

MODELS AVAILABLE

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

ESD Turntable

Regular price $83.00

Shipping calculated at checkout.

ESD SAFE TURNTABLES FOR COMPONENT MANUAL ASSEMBLY

Work on heavy or awkward mechanical assemblies
Ideal for assembly or re-work
ESD safe for use with electrical assemblies
Surface material is conductive rubber; disc material is durable plastic
Surface resistivity of 5 x 10e6 Volume resistivity of 1x10e7
Weight capacity of 200 lbs for D380
360 degrees rotation

Three sizes available:

Model D300		12" dia. x 1/2" height
Model D380		15" dia. X 1/2" height
Model D500		20" dia. X 5/8" height

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Adjustable Magazine: Karry-All Model 79

Regular price $60.42

Shipping calculated at checkout.

Holding board capacity:

The standard Karry-Alls can tolerate solvents and temperatures to 185°F.

PCB Magazine Rack is made of volume conductive polypropylene and aluminum

18 boards from 8”-20”W|8”–15”D
18 Slots on a pitch of 0.700”
Specially designed for hard to hold edges.
Unique Double slots:
TYPE A)0.125" W x 0.125" D
TYPEB)0.600”W x 0.200”D
For boards with components on the edges.
Easy board insertion with offset ribs.
Thumb screws for tool-free adjustment.
ESD SAFE
Model 79-20B-5 fits a standard 17" x 21" tote box.
Horizontal storage with optional leg brackets (KAL-2) for 5" deep model.
11" deep models need no brackets for horizontal storage.
Optional carrying handle.

Options Available

Part Number	Description	Dimensions
79-5CP	Card Guide	15.25 long x 5.5 deep
79-11CP	Card Guide	15.25 long x 11 deep
KAV-9	Extrusion	9" Long
KAV-15	Extrusion	15" Long
KAV-21	Extrusion	21" Long
KAH-2	Carrying Handle	N/A
KAL-1	Legs for Horizontal Storage	N/A
87-1	Thumb Screw	N/A

Karry-All Model 79 Models Available

Model Number	Overall Dimensions			Board Capacity
	L "	W "	D "	W "	D "
79-8-5CP	15.25	9	5.50	8	8
79-14-5CP	15.25	15	5.50	14	8
79-14-11CP	15.25	15	11	14	15
79-20-5CP	15.25	21	5.50	20	8
79-20-11CP	15.25	21	11	20	15
79-8-11CP	15.25	9	11	8	14

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Adjustable Magazine: Karry-All Model 80

Regular price $162.10

Shipping calculated at checkout.

Holding board capacity 12”– 24” W | 12” D

The standard Karry-Alls can tolerate solvents and temperatures to 185°F.

PCB Magazine Rack is made of volume conductive polypropylene and aluminum

Card guides are 12.5” D, optional 18” and 24” guides for larger boards with stops on the end.
75 numbered slots (0.110” W x 0.155” D on a 0.210” pitch.
Easy board insertion with different offset ribs
Steel stiffeners and molded ribbing prevent flexing of card guides
Fits many standard transport cards for horizontal transport
Extrusions can be ordered (To make it wider), please contact us.
Optional carrying handle
Please refer to pictures 3 and 4, there are custom-made transport carts for magazine racks.

Model No.	Overall Dimensions “			Board Capacity “
Model No.	L	W	D	W	D
80-12-2	18.75"	14"	12.5"	12"	12"
80-18-2	18.75"	20"	12.5"	18"	12"
80-24-2	18.75"	26"	12.5"	24"	12

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Adjustable Magazine Racks: Karry-All Model 76

Adjustable Magazine Racks: Karry-All Model 76

Regular price $51.60

Shipping calculated at checkout.

Holding board capacity:

The standard Karry-Alls can tolerate solvents and temperatures to 185°F.

39 boards from 8”-20”W|6”–10”D
39 numbered slots0.135" W x 0.135" D on a 0.260" pitch.
Easy board insertion with offset ribs.
Thumb screws for tool-free adjustment.
ESD SAFE
Add additional card guides to create multiple sections
Optional leg brackets for horizontal storage of 4” deep models.
8” deep models can be used horizontally without legs
Optional carrying handle

OPTIONS AVAILABLE

New Column	New Column	New Column
Part Number	Description	Dimensions
77-4CP	Card Guide	13.25 long x 4 deep
77-8CP	Card Guide	13.25 long x 8 deep
KAV-8	Extrusion	9" Long
KAV-14	Extrusion	15" Long
KAV-20	Extrusion	21" Long
KAV-72	Extrusion	72" Long
KAH-2	Carrying Handle	N/A
KAL-1	Legs For Horizontal Storage	N/A
87-1	Thumb Screw	N/A

MODELS AVAILABLE

New Column	New Column	New Column	New Column	New Column	New Column
Part Number	Overall Dimensions	Board Capacity		L "	W "
D "			76-8-4CP	13.25	9
4			76-8-8CP	13.25	9
8			76-14-4CP	13.25	15
4			76-14-8CP	13.25	15
8			76-20-4CP	13.25	21
4			76-20-8CP	13.25	21
8

For more information, contact:

Eddison Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

NON CONDUCTIVE PCB HOLDER Model RA-14

Regular price $48.50

Shipping calculated at checkout.

UNIVERSAL PCB HOLDER RA-14

Designed for boards that require a large full slot.
Supports High Temperature
Tolerates most chemicals and 350F.
Molded-in Phenolic
Measures 14" x 6" with 25 slots that measure .180" W x .333" D on a .500" pitch; weighs 1.7 lbs.
Undercut ends for carrying and drainage holes.
Designed for baking and chemical resistance.
NEW! Double wide RA14-D for large panels (Perfect Alignment)

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Combo-Slide Bench Top PCB Assembly Fixture w/ 2 PCB Rails

Combo-Slide Bench Top PCB Assembly Fixture w/ 2 PCB Rails

Regular price $319.00 Sale price $281.52

Shipping calculated at checkout.

Fancort 48"L x 19-1/2"W

Combo-Slide Bench Top PCB Assembly Fixture w/ 2 PCB Rails

CS-48 48"

Combo-Slide Rack with Two PCB Slide Rails ESD-Safe
For use with progressive hand assembly
Material: Steel

Outside Height: 3” F 7.25” R Outside Length 19.5”
Outside Width 48”
Shipping Weight: 24 pounds

The Fancort Industries CS-48 Combo-Slide Bench-Top PCB Assembly Fixture is perfect for progressive PCB hand assembly.

Features

Adjustable capacity to hold 18" boards on a 20 degree working angle
Stations connect together at end panels and rails
Rugged construction of 1/16" steel with an attractive blue enamel finish
Very sturdy design for stability
Two styles of rails, one for PCBs, one for fixtures
Optional parts rack with two stringers

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

ESD-SAFE Plastic Component Trays

Regular price $14.52

Shipping calculated at checkout.

ESD COMPONENT TRAYS

Store and ship components and assemblies in these economical, stackable, rugged reinforced trays molded in 0.085" thick ESD safe plastic with surface resistivity below 10 (to the 6th power)Ω and temperature tolerance to 60oC.
MS-Q11.8T Model tolerates is for High Temperature 160oC
Rectangular trays in different sizes for storage and product transportation.
MS-Q11 model has slots molded to insert dividers.
Plastic coated corrugated with ESD protection dividers
Single cavity with slots for dividers to create cavities 2-7/8" or 3-3/4" x 4.52". Lip on front and back for hanging on a rack.
Four slots for dividers to create cavities 2-7/8" or 3-3/4" in length; Optional Dividers P/NMS-Q13 D

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Model RA-24

Regular price $32.50

Shipping calculated at checkout.

Universal Economical Rack with ESD protection

Requires no adjustment for handling clinched, soldered, or bare board of almost any size.
Molded-in tough, reinforced, conductive material that meets Mil-Spec #B- 81705-B for static discharge
20 Slots with easy-to-load angle(.125” W x .325” D on a 1” pitch)
Measures 8.375” x 23”
Open carrying handles and stackable.
Extremely rigid and flat because of extensive ribbing that is built into the mold. This helps to maintain stability when transporting or sitting on a bench or cart. It is injection molded in a reinforced polymer that can tolerate temperatures up to 104 C (220F). This material is conductive and provides ESD protection for the boards with a volume resistivity is 101-103ohm-cm, and surface resistivity if 104-106ohms/sq.
ESD SAFE

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

SMART SOLDER FIXTURES

Regular price Sale price $278.00

Shipping calculated at checkout.

Fixture for finger conveyors only

Frames built in titanium (F3) or hardcoat anodized aluminum (F1)
Rigid construction and design prevent skewing
Finger not included
F1 frame has built-in board holding grooves requiring only one movable rail to support a PCB

Sizes from 12 wide x 18” long to 18” wide and 22” long; custom sizes available

Typical Lead times

Fabrication: ~5 Days

For more information, contact:

Eddie Preciado
eddison@fancort.com
(916)-317-6077

Name

Phone number Message

Currency