PCB DEPANELING EQUIPMENT

General


Fancort offers the widest selection of depaneling machines for

pre-scored and routed boards from any one company.

Our machines varying in throughput, cost, and stress level.

Fancort's North American sales and support team

will always be there to help.

Typewriter effect
Please select a model from the TAB panel below.

VPD5-330 LINEAR "V" CUT - HIGH VOLUME PCB CUTTER

General


VPD5-330 Linear "V" Cut - High Volume PCB Depaneler

Equipment designed to minimize board stress and avoid component damage. Heavy frame for stability, pneumatic cylinder operated.

Specs.

• Board type – V-Score
• Board material – FR4
• Max board length – 14"
• Min. board thickness – 0.024"
• Max board thickness – > 0.010”
• Automation – Very-high
• Stress level – High

Features

Dual "V" Shape blades for a perfect board cut without bending or tension
Pneumatic Footpedal operated
Separates panels up to 0.100" thickness
Minimum board thickness of 0.024"
Shears boards safely with parts as close as 0.020" to score line, including ceramic capacitors.
Pneumatic system
"Poka-Yoke" system will only allow correct board placement to avoid mistakes

Spare parts available

VPD5-330LK (Linear Blade Replacement)

Options & Accesories


Options

Modified blades for benchmark
Safety enclosure custom designed
Tray to safely catch boards after depaneling process
Upgrade to VPD5-330V AUTOMATED V-SCORE PCB CUTTER
Contact us for more custom options

VPD3-1M MANUAL CIRCULAR BLADE DEPANELER

General


Low to Moderate Volume

Equipment designed to minimize board stress and avoid component damage. Heavy frame for stability and precision linear bearing ensures proper blade alignment for a perfect cut.

 

 

Specs.

• Board type – Score
• Board material – FR-4
• Max board length – 18"
• Min. board thickness – 0.040"
• Stress level – Lower

Features

Round & Linear knives to reduce stress during the cut
Locking Guide
Linear Bearing mechanism to align blades automatically
Adjustable work table (Height & Angle)
OSHA Safety guides
Automatic parallel blade adjustment
Wide table on both sides of knives 6.25" x 20"
Cuts board with components overhanging scoreline with modified linear knife.

 

Spare parts available

VPD3-1CK (Blade Replacement)
VPD3C-1LK (Linear Blade Replacement)
VPD3C-1CG (Circular Blade Guides KIT)

Options & Accesories


Options

Motor Overload protection
Microprocessor Board
Relay
Photoelectric Safety Sensor
Proximity Sensor
Contact us for more custom options

VPD3-1S MOTORIZED PCB DEPANELER

General


Motorized PCB Depaneler

Equipment designed to minimize board stress and avoid component damage. Heavy frame for stability and precision linear bearing ensures proper blade alignment for a perfect cut.

 

 

Specs.

• Board type – Score
• Board material – FR-4
• Max board length – 18"
• Min. board thickness – 0.040"
• Stress level – Lower

Features

Round & Linear knives to reduce stress during the cut
Locking Guide
Linear Bearing mechanism to align blades automatically
Adjustable work table (Height & Angle)
OSHA Safety guides
Automatic parallel blade adjustment
Wide table on both sides of knives 6.25" x 20"
Cuts board with components overhanging scoreline with modified linear knife

 

Spare parts available

VPD3-1CK (Blade Replacement)
VPD3C-1LK (Linear Blade Replacement)
VPD3C-1CG (Circular Blade Guides KIT)

Options & Accesories


Options

Motor Overload protection
Microprocessor Board
Relay
Photoelectric Safety Sensor
Proximity Sensor
Contact us for more custom options

VPD2-400 SEMI-AUTOMATIC DESKTOP DEPANELING

General


Low to moderate volume

Equipment designed to minimize board stress and avoid component damage. Heavy frame for stability and precision linear bearing ensures proper blade alignment for a perfect cut.

Specs.

• Board type – Score
• Board material – FR-4
• Max board length – 16"
• Min. board thickness – 0.04"
• Stress level – Higher

Features

Locking Guide
Separates 0.050" - 0.070" from score line without damage components.
Easy adjustment and positive locking of guides and knives for different thickness boards.
Adjustable Speed control
Automatic parallel blade adjustment
Edge distance guide for separating scored boards

 

Spare parts available

DWD81107-14-2 (Lower front guide)
DWD81107-15-2 (Upper front/ lower and upper back guide)
VPD3-1CK (BladeReplacement)

Options & Accesories


Options

Knife size
Guide size
Contact us for more custom options

NTP-2 SINGLE KNIFE DEPANELER

General


Specs.

• Board type – Tab
• Board Material
– FR-4
• Capacity
– Low
• Automation
– Low
• Stress Level
– Higher

Features

Footswitch Operated
Separates hard to reach tabs
Cuts board up to 0.080" thickness
Two locating pins maintain board position
Vertical Cutting motion
Movable Location Pins for hard to reach areas.
C-Frame with torsion resistance
Two opposing Knives

 

Spare parts available

NTP-2K Spare parts for blades
NTP-2P Spare part of pin guides

Options & Accesories


Customizable Knives (specify width)
Customizable Pins (specify diameter)

VPD-10 BENCH TOP PCB DEPANELER FOR LED PCB'S

General


Equipment designed to minimize board stress and avoid component damage. Three pairs of precision beveled cutting blades can ensure the board does not bend or deform. The guide can be adjusted vertically to suit different LED boards. Depth between upper circular blades can be precisely adjusted to reduce stress on score- line edge and blade wear.

Features

Separates panels up to 0.100" thickness
The Longest Panel: No limit
Minimum board thickness of 0.024"
Shears boards safely with parts as close as 0.020" to score line, including ceramic capacitors.
Pneumatic system
"Poka-Yoke" system will only allow correct board placement to avoid mistakes

 

Spare parts available

VPD-10K (Set - 6 Circular Blades)

Options & Accesories


Safety enclosure custom designed
Tray to safely catch boards after depaneling process
Contact us for more custom options

VPD5-500P METAL BOARD DEPANELER

General


Designed to separate metal boards

These depaneling equipment can process boards longer than 5000mm due to its open-sided design and boards can be fed through in more than one cycle. Equipment designed to cut metal boards minimize board stress and avoid component damage. Heavy frame for stability, pneumatic cylinder operated.

Specs.

• Board type – Score
• Board material – Metal
• Knife length – 20"
• Min. board thickness – 0.024"

Features

Dual "V" Shape blades for a perfect board cut without bending or tension
Pneumatic Footpedal operated
Separates metal panels
Minimum board thickness of 0.024"
Pneumatic system
"Poka-Yoke" system will only allow correct board placement to avoid mistakes

Spare parts available

VPD5-500P (Linear Blade Set Replacement)
VPD5-500P (Foot Switch Replacement)
VPD5-500P (Pressure Gauge)

Options & Accesories


Options

Modified blades for benchmark
Safety enclosure custom designed
Tray to safely catch boards after depaneling process
Contact us for more custom options

AVS DEPANELING SYSTEM

General


AVS DEPANELING SYSTEM (VPD5-330V AUTOMATED V-SCORE - HIGH VOLUME PCB CUTTER)

Equipment designed to minimize board stress and avoid component damage.
Heavy frame for stability, servo motor operated with touch control, and custom designed fixture included. Capable to perform up to 20 cuts. *Optional: Unlimited cuts within the work area.

Specs.

• Board type – V SCORE
• Board material – FR4
• Max board length – 14"
• Min. board thickness – 0.024"
• Max board thickness – >0.010"
• Automation – Very-high
• Stress level – Lowest

Features

• Touch Screen Control
• PLC Control
• Stores up to 28 Programs (Expandable)
• Dual "V" Shape blades for a perfect board cut without bending or tension
• Pneumatic Footpedal operated
• Separates panels up to 0.100" thickness
• Minimum board thickness of 0.024"
• Shears boards safely with parts as close as 0.020" to score line, including ceramic capacitors.
• Pneumatic system
• "Poka-Yoke" system will only allow correct board placement to avoid mistakes

Options

• Modified blades for benchmark
• Safety enclosure custom designed
• Tray to safely catch boards after depaneling process
• Custom Fixture for your application
• Contact us for more custom options

Spare Parts

• VPD5-330LK (Linear Blade Replacement)

SHOP OUR PCB DEPANELING EQUIPMENT

We can customize to fit your needs, for more information, click on the button or contact

PCB DEPANELING

Trusted by the Aerospace & Defense Industry for over 47 years