Model RA-18
Regular price $24.73
Shipping calculated at checkout.
Universal Rack to handle and process PCB Boards
- Dimensions 6" x 18", weights 0.5 lb.
- 25 slots with parallel sides for more rigid holding, 0.125" x 0.300 on a 0.625" pitch.
- High temperature conductive model for bare board processing tolerates acids, alkaline and solvents
- Tolerates 185°F = 85°C
- ESD-SAFE
- Double wide models expand to hold boards up to 24" wide with a carrying handle
- RA-18SDG Green static dissipative material for lead-free boards
| RA-18C | Black Standard Conductive (185ºF) |
| RA-18CT | Black High Temp Conductive (185ºF) |
| RA-18HT | Black Very High Temp Polysulfone (275ºF) Non-ESD |
| RA-18CTD | Black Double Wide Conductive High Temp |
| RA-18HTD | Black Double Wide, Very High Temp. |
| RA-18CD | Double Wide/ Standard Temperature ESD-Safe |
| RA-18C/SMT | Blue For those boards with components near the edge; slot size .075" x .125" on .500" pitch |
| RA-18SDG | Green Static dissipative material for lead-free boards |
For more information, contact:
Jose Farina
jfarina@fancort.com
ESD Turntable
Regular price $109.45
Shipping calculated at checkout.
ESD SAFE TURNTABLES FOR COMPONENT MANUAL ASSEMBLY
- Work on heavy or awkward mechanical assemblies
- Ideal for assembly or re-work
- ESD safe for use with electrical assemblies
- The surface material is conductive rubber; disc material is a durable plastic
- Surface resistivity of 5 x 10e6 Volume resistivity of 1x10e7
- 360 degrees rotation
| Two sizes available: | |
| Model D380 | 15" dia. X 1/2" height |
| Model D500 | 20" dia. X 5/8" height |
For more information, contact:
Jose Farina
jfarina@fancort.com
Model RA-20
Regular price $34.58
Shipping calculated at checkout.
Our largest universal rack available
- 20 Slots with easy-to-load angle(.125” W x .325” D on a .750” pitch)
- Measures 7” x 20”, weighs 2 lbs.
- Open carrying handles and stackable.
- Tolerates 185°F = 85°C
- ESD SAFE
- Molded in tough, reinforced, conductive material that meets Mil-Spec #B-81705-B for static discharge
For more information, contact:
Jose Farina
jfarina@fancort.com
Adjustable Racks: Magazine Rack BG Series
Regular price $176.00
Shipping calculated at checkout.
MAGAZINE RACK BG SERIES
PCB Magazine Rack is made of volume conductive polypropylene and metal
- Gear adjusting card guides on some models to monitor parallelism and simplify set-up
- Metal top and bottom on some models
- Zero flexing of card guides with steel reinforcing supports and molded ribs
- Standard ABS model (N) tolerates 176°F = 80°C, plus optional models to 392°F = 200°C
- Surface resistivity of 10-4 to 10-6 ohm/cm
- Removable end stop
- Slot size is 5mm (.196")
- Carrying handles on top and bottom
- Assembly Instructions included
- Transport Dolly available
For more information, contact:
Jose Farina
jfarina@fancort.com
Angle Rack Model PCBH
Regular price $26.50
Shipping calculated at checkout.
ANGLED RACKS FOR PCB BOARDS
- Economical Rack with ESD Protection with no adjustment required for handling clinched, soldered, or bare boards.
- Standard Angled-Racks are molded in tough, reinforced, conductive material that meets Mil-Spec #B-81705-B for static discharge.
- Holds boards on two contiguous edges.
- Dimensions 10” W x 8” L x 4” H
- 25 Slots with easy-to-load angle, 0.125" W x 0.200” D
- Drainage holes for use in cleaners
- Tolerates 185°F = 85°C
- ESD SAFE
MODELS AVAILABLE
For more information, contact:
Jose Farina
jfarina@fancort.com
Model RA-24
Regular price $35.75
Shipping calculated at checkout.
Universal Economical Rack with ESD protection
- Requires no adjustment for handling clinched, soldered, or bare board of almost any size.
- Molded-in tough, reinforced, conductive material that meets Mil-Spec #B- 81705-B for static discharge
- 20 Slots with easy-to-load angle(.125” W x .325” D on a 1” pitch)
- Measures 8.375” x 23”
- Open carrying handles and stackable.
- Extremely rigid and flat because of extensive ribbing that is built into the mold. This helps to maintain stability when transporting or sitting on a bench or cart. It is injection molded in a reinforced polymer that can tolerate temperatures up to 220°F = 105°C. This material is conductive and provides ESD protection for the boards with a volume resistivity is 101-103ohm-cm, and surface resistivity if 104-106ohms/sq.
- ESD SAFE
For more information, contact:
Jose Farina
jfarina@fancort.com
ESD-SAFE Plastic Component Trays
Regular price $15.97
Shipping calculated at checkout.
ESD COMPONENT TRAYS
- Store and ship components and assemblies in these economical, stackable, rugged reinforced trays molded in 0.085" thick ESD safe plastic with surface resistivity below 10 (to the 6th power)Ω and temperature tolerance to 60oC.
- Rectangular trays in different sizes for storage and product transportation.
- MS-Q11 model has slots molded to insert dividers.
- Plastic coated corrugated with ESD protection dividers
- Single cavity with slots for dividers to create cavities 2-7/8" or 3-3/4" x 4.52". Lip on front and back for hanging on a rack.
For more information, contact:
Jose Farina
jfarina@fancort.com