C-Frame Pneumatic Presses: 1900lbs to 20,000 lbs
Regular price $6,455.00 Sale price $4,417.00
Shipping calculated at checkout.
American Built & Easily Customizable for Light Assembly Work
Fancort's pneumatic air presses are quiet, heavy-duty, and deliver smooth operation.Designed for applications requiring 1 ton or more, these very sturdy pneumatic air presses come in several models of different force ranges.
Press Output Comparisons in Pounds of Force
| Air Press Model | 60 psi | 80 psi | 100 psi |
| O-5000LF / 22 & 30 | 1150 | 1500 | 1900 |
| O-5000LF-4 / 22 & 30 | 1250 | 2500 | 3800 |
| O-5000LF-6 (2 Stage) | 3100 | 4300 | 5500 |
| O-5000LF-8 (3 Stage) | 4000 | 6000 | 8000 |
| O-5000LF-10 (4 Stage) | 6000 | 8000 | 10000 |
Features:
- Large area for tool mounting
- 1" Thick Aluminum Frame / Blue Enamel finish
- OSHA Approved two-hand safety controls
- EC approved. Certificate # EC95/00022
- Centrally located ram with 1.5" x 1" shank collar
- 4" stroke standard, 4.25" shut height to ram, from die plate
- Optional stroke lengths available
- Double-acting 5" cylinder (1900 LBS at 100 PSI), cushioned stops
- 6" cylinder (5500 LBS at 100 PSI) optional
- Speed control, filter/regulator, dual palm anti-tie-down controls
- Male rod threaded 3/4"-16 TPI ram for 2-ton presses
- Male rod threaded 1"-14 TPI for all other Fancort C Fame presses
- Minimum press cycle is 5 seconds, about 2 seconds up or down using speed control
- Part counter and front-mounted air gauge
- Measures 17" x 13.5" x 27"
-
Shipped "Ready-to-Run!
-
One year warranty
-
Commonly used by Aerospace & Defense, Automotive, Electronics, Food & Industrial divisions
General Dimensions:
Configurations Available:
- Automated Pneumatic Dual force Heated Press with Heater Controller and Elements
- Columns available in lengths from 8" to 24"
- Electrical timing circuit to control downward dwell time from less than 1 second to 500 hours.
- Load Cell Monitoring Kit
- Optional Press ergonomic risers, available in any height
- Twin regulators with force range 50-1175 lbs to maintain the output force during the cycle P/N BP-500-2 / REG
- 5" Cylinder Twin regulators with force range 50-1900 lbs to maintain the output force during the cycle P/N BP-500-2 / REG / 5
- Non-Rotating Ram P/N BPNR-1000
- Longer Stroke available up to 9" STD
- Non-Contact electronic two-hand OSHA approved safety controls P/N BP-NC100.
- Round Collar for die shank mounting, 1.5" diameter x 1" deep P/N BP-SC100
- Horseshoe Collar for die mounting P/N BP-HC100
- Standard "T" for use with horseshoe collar P/N BP-HCT100
Safety Enclosure: P/N BP-SP-E
- Standard enclosure for presses
- Approximate size 12" x 12" x 26", custom sizes available
- Door Safety interlock system included
- Integrated two-hand safety system
- Aluminum ridged frame integrated
- Clear front panels and opaque side panels, open back STD for airflow
- Optional ESD safe plastic available
MODELS AVAILABLE
| MODEL | Complete Press Description | LBS LOAD |
| O-5000LF | with 5" cylinder | 1900 |
| O-5000LF-4 | special 6" cylinder | 3800 |
| O-5000LF-6 | with 6" cylinder | 5500 |
| O-5000LF-8 | multi-stage (2) cylinders | 8000 |
| O-5000LF-22 | with 5" cylinder, 22" inside width | 1900 |
| O-5000LF-30 | with 5" air cylinder, 30" inside width | 1900 |
| O-5000LF-30-4 | with special 6" air cylinder, 30" inside width | 3800 |
| O-5000LF-10 | multi-stage (3) cylinders | 10000 |
| *Please Note: | Pressure figures @100 PSI Line Input Pressure |
We can customize your Pneumatic Presses to fit your needs, for more information, contact:
Robert Antonelli
rantonelli@fancort.com
(888)-326-2678 x 719
PNEUMATIC ADJUSTABLE COLUMN PRESSES: 1LB TO 10 TONS
Regular price $2,499.00 Sale price $2,147.00
Shipping calculated at checkout.
American Built & Easily Customizable for Light Assembly Work
Fancort's adjustable column pneumatic presses are designed for light assembly work from 1lb to 10 tons of pressure.
These pneumatic air presses have a small footprint, side-mounted controls, adjustable column, speed control, and keyway for easy tool mounting.
Features:
Solid steel column with 11’’ of height adjustment: longer columns available.
8’’ x 6’’ base with keyway for easy tool mounting.
3’’ stroke standard.
Minimum cycle time 2 seconds.
Two-hand OSHA approved controls, filter regulator, and speed control.
Optional bore cylinders and stroke lengths.
Male threaded rod 3⁄4-16‘’ x 1’’.
8’’ x 6’’ base with keyway for easy tool mounting.
3’’ stroke standard.
Minimum cycle time 2 seconds.
Two-hand OSHA approved controls, filter regulator, and speed control.
Optional bore cylinders and stroke lengths.
Male threaded rod 3⁄4-16‘’ x 1’’.
Measures 16" x 10" x 23"
Made in the USA
Made in the USA
Shipped "Ready-to-Run!
One year warranty
One year warranty
Commonly used by Aerospace & Defense, Automotive, Electronics, Food & Industrial divisions
Configurations Available:
- Automated Pneumatic Dual force Heated Press with Heater Controller and Elements
- Columns available in lengths from 8" to 24"
- Electrical timing circuit to control downward dwell time from less than 1 second to 500 hours.
- Load Cell Monitoring Kit
- Optional Press ergonomic risers, available in any height
- Twin regulators with force range 50-1175 lbs to maintain the output force during the cycle P/N BP-500-2 / REG
- 5" Cylinder Twin regulators with force range 50-1900 lbs to maintain the output force during the cycle P/N BP-500-2 / REG / 5
- Non-Rotating Ram P/N BPNR-500
- Longer Stroke available up to 9" STD
- Non-Contact electronic two-hand OSHA approved safety controls P/N BP-NC100.
- Round Collar for die shank mounting, 1.5" diameter x 1" deep P/N BP-SC100
- Horseshoe Collar for die mounting P/N BP-HC100
- Standard "T" for use with horseshoe collar P/N BP-HCT100
Safety Enclosure: P/N BP-SP-E
- Standard enclosure for presses
- Approximate size 12" x 12" x 26", custom sizes available
- Door Safety interlock system included
- Integrated two-hand safety system
- Aluminum ridged frame integrated
- Clear front panels and opaque side panels, open back STD for airflow
- Optional ESD safe plastic available
MODELS AVAILABLE
| PART NUMBER | STD OUTPUT RANGE (LBS) | COLUMN STROKE | ADJUSTMENT TO INTERNAL HEIGHT |
| BPO-500F | 400-725 LBS | 3" | 11" |
| BPO-500F-1 | 5 -50 LBS | 3" | 11" |
| BPO-500F-1SP | 60-100 LBS | 3" | 11" |
| BPO-500F-4 | 650-1175 LBS | 3" | 11" |
| BPO-700F | 1150-1900 LBS | 4" | 15" |
We can customize your Pneumatic Press to fit your needs, for more information, contact:
Robert Antonellirantonelli@fancort.com
(888)-326-2678 x 719
Fancort Hand Presses O-3300F
Regular price $2,361.00 Sale price $1,888.80
Shipping calculated at checkout.
American Built Quality for Low Volume
Most often sold as an accessory for our lead forming tools these hand presses are designed for low volume applications.
For most applications, if often makes sense to upgrade to our line of pneumatic presses which reduce operator stress and increase reliability at a fractional cost premium.
- 5-inch stroke with stroke limiter
- 11-inch steel adjustable column
- 12-inch steel handle
- Base has “T” slot with hardware for easy tooling mounting
- Measures 8” X 9” x 18”
We can customize your Presses to fit your needs, for more information, contact:
Robert Antonelli
rantonelli@fancort.com
(888)-326-2678 x 719
BPO-500E-F60 Smartpress™ Servo Presses
Regular price $8,499.00 Sale price $7,240.90
Shipping calculated at checkout.
Programmable Load Control for Common Applications
American built from high-quality components, these economical, programmable, electrically operated servo presses technology are designed for critical assembly applications that can't be executed with air or hydraulic presses
Features:
- Shipped "Ready-to-Run!" or contact us for customizing. Programmable servo press for precision control of force, stroke, speed, dwell, and more from 5 to 60kgf Stroke length 4" Male threaded rod M 14 x 1.5mm Internal height adjustment 11" typical
- Base with keyway and two bolts for tool mounting 8" x 6"
- Dual non-contact safety control
- Positioning accuracy of +/- .004" (.01mm). Closed-loop servo motor amplified
- The max speed on the Smart Press™ is 100mm per second
- Control force to a tolerance of +/- 10% of target point
- Program and operate with user-friendly software, NO SPC
- Store up to 15 programs. Program counter, repeat and loop capabilities
- General Dimensions 11"x11"x27"
- Weight 40lbs
- Made in U.S.A.
Options available:
- Integrated heated tool option: Compact high-reliability micro heaters and Thermo- Couples 0-500 F
- Electrical Timing Circuit for Presses: Controls dwell time on downward stroke from milliseconds to 500 hours, and is completely adjustable. The activator on the air cylinder is adjustable to set the position of the beginning of the timing.
Safety Enclosure: P/N BP-SP-E
- Standard enclosure for presses
- Approximate size 12" x 12" x 26", custom sizes available
- Door Safety interlock system included
- Integrated two-hand safety system
- Aluminum ridged frame integrated
- Clear front panels and opaque side panels, open back STD for airflow
- Optional ESD safe plastic available
Optional Press ergonomic risers, available in any height:
We can customize your Pneumatic Press to fit your needs, for more information, contact:
Robert Antonellirantonelli@fancort.com
(888)-326-2678 x 719
