American Built & Easily Customizable for Light Assembly Work
Fancort's pneumatic air presses are quiet, heavy-duty, and deliver smooth operation.Designed for applications requiring 1 ton or more, these very sturdy pneumatic air presses come in several models of different force ranges.
Press Output Comparisons in Pounds of Force
Air Press Model | 60 psi | 80 psi | 100 psi |
O-5000LF / 22 & 30 | 1150 | 1500 | 1900 |
O-5000LF-4 / 22 & 30 | 1250 | 2500 | 3800 |
O-5000LF-6 (2 Stage) | 3100 | 4300 | 5500 |
O-5000LF-8 (3 Stage) | 4000 | 6000 | 8000 |
O-5000LF-10 (4 Stage) | 6000 | 8000 | 10000 |
Features:
- Large area for tool mounting
- 1" Thick Aluminum Frame / Blue Enamel finish
- OSHA Approved two-hand safety controls
- EC approved. Certificate # EC95/00022
- Centrally located ram with 1.5" x 1" shank collar
- 4" stroke standard, 4.25" shut height to ram, from die plate
- Optional stroke lengths available
- Double-acting 5" cylinder (1900 LBS at 100 PSI), cushioned stops
- 6" cylinder (5500 LBS at 100 PSI) optional
- Speed control, filter/regulator, dual palm anti-tie-down controls
- Male rod threaded 3/4"-16 TPI ram for 2-ton presses
- Male rod threaded 1"-14 TPI for all other Fancort C Fame presses
- Minimum press cycle is 5 seconds, about 2 seconds up or down using speed control
- Part counter and front-mounted air gauge
- Measures 17" x 13.5" x 27"
-
Shipped "Ready-to-Run!
-
One year warranty
-
Commonly used by Aerospace & Defense, Automotive, Electronics, Food & Industrial divisions

Configurations Available:
- Automated Pneumatic Dual force Heated Press with Heater Controller and Elements
- Columns available in lengths from 8" to 24"
- Electrical timing circuit to control downward dwell time from less than 1 second to 500 hours.
- Load Cell Monitoring Kit
- Optional Press ergonomic risers, available in any height
- Twin regulators with force range 50-1175 lbs to maintain the output force during the cycle P/N BP-500-2 / REG
- 5" Cylinder Twin regulators with force range 50-1900 lbs to maintain the output force during the cycle P/N BP-500-2 / REG / 5
- Non-Rotating Ram P/N BPNR-1000
- Longer Stroke available up to 9" STD
- Non-Contact electronic two-hand OSHA approved safety controls P/N BP-NC100.
- Round Collar for die shank mounting, 1.5" diameter x 1" deep P/N BP-SC100
- Horseshoe Collar for die mounting P/N BP-HC100
- Standard "T" for use with horseshoe collar P/N BP-HCT100
Safety Enclosure: P/N BP-SP-E
- Standard enclosure for presses
- Approximate size 12" x 12" x 26", custom sizes available
- Door Safety interlock system included
- Integrated two-hand safety system
- Aluminum ridged frame integrated
- Clear front panels and opaque side panels, open back STD for airflow
- Optional ESD safe plastic available
MODELS AVAILABLE
MODEL | Complete Press Description | LBS LOAD |
O-5000LF | with 5" cylinder | 1900 |
O-5000LF-4 | special 6" cylinder | 3800 |
O-5000LF-6 | with 6" cylinder | 5500 |
O-5000LF-8 | multi-stage (2) cylinders | 8000 |
O-5000LF-22 | with 5" cylinder, 22" inside width | 1900 |
O-5000LF-30 | with 5" air cylinder, 30" inside width | 1900 |
O-5000LF-30-4 | with special 6" air cylinder, 30" inside width | 3800 |
O-5000LF-10 | multi-stage (3) cylinders | 10000 |
*Please Note: | Pressure figures @100 PSI Line Input Pressure |
We can customize your Pneumatic Presses to fit your needs, for more information, contact:
Robert Antonelli
rantonelli@fancort.com
(888)-326-2678 x 719