Products

Filter
QUICK VIEW
C-Frame Pneumatic Presses: 1900lbs to 20,000 lbs
from $5,077.00

C-Frame Pneumatic Presses: 1900lbs to 20,000 lbs

$5,077.00
/
Shipping calculated at checkout.

American Built & Easily Customizable for Light Assembly Work

Fancort's pneumatic air presses are quiet, heavy-duty, and deliver smooth operation.
Designed for applications requiring 1 ton or more, these very sturdy pneumatic air presses come in several models of different force ranges.

Press Output Comparisons in Pounds of Force

Air Press Model 60 psi 80 psi 100 psi
O-5000LF / 22 & 30 1150  1500 1900
O-5000LF-4 / 22 & 30 1250  2500 3800
O-5000LF-6 (2 Stage) 3100  4300 5500
O-5000LF-8 (3 Stage) 4000  6000 8000
O-5000LF-10 (4 Stage) 6000  8000 10000

 

Features:

  • Large area for tool mounting
  • 1" Thick Aluminum Frame / Blue Enamel finish
  • OSHA Approved two-hand safety controls
  • EC approved. Certificate # EC95/00022
  • Centrally located ram with 1.5" x 1" shank collar
  • 4" stroke standard, 4.25" shut height to ram, from die plate
  • Optional stroke lengths available
  • Double-acting 5" cylinder (1900 LBS at 100 PSI), cushioned stops
  • 6" cylinder (5500 LBS at 100 PSI) optional
  • Speed control, filter/regulator, dual palm anti-tie-down controls
  • Male rod threaded 3/4"-16 TPI ram for 2-ton presses
  • Male rod threaded 1"-14 TPI for all other Fancort C Fame presses
  • Minimum press cycle is 5 seconds, about 2 seconds up or down using speed control
  • Part counter and front-mounted air gauge
  • Measures 17" x 13.5" x 27"
  • Shipped "Ready-to-Run!
  • One year warranty
  • Commonly used by Aerospace & Defense, Automotive, Electronics, Food & Industrial divisions
General Dimensions:
 

   


Configurations Available:

  • Automated Pneumatic Dual force Heated Press with Heater Controller and Elements
  • Columns available in lengths from 8" to 24"
  • Electrical timing circuit to control downward dwell time from less than 1 second to 500 hours. 
  • Load Cell Monitoring Kit
  • Optional Press ergonomic risers, available in any height
  • Twin regulators with force range 50-1175 lbs to maintain the output force during the cycle P/N BP-500-2 / REG
  • 5" Cylinder Twin regulators with force range 50-1900 lbs to maintain the output force during the cycle P/N BP-500-2 / REG / 5
  • Non-Rotating Ram P/N BPNR-1000  
  • Longer Stroke available up to 9" STD
  • Non-Contact electronic two-hand OSHA approved safety controls P/N BP-NC100.
  • Round Collar for die shank mounting, 1.5" diameter x 1" deep P/N BP-SC100
  • Horseshoe Collar for die mounting P/N BP-HC100
  • Standard "T" for use with horseshoe collar P/N BP-HCT100

Safety Enclosure: P/N BP-SP-E

  • Standard enclosure for presses
  • Approximate size 12" x 12" x 26", custom sizes available
  • Door Safety interlock system included
  • Integrated two-hand safety system 
  • Aluminum ridged frame integrated 
  • Clear front panels and opaque side panels, open back STD for airflow
  • Optional ESD safe plastic available

 

MODELS AVAILABLE

MODEL Complete Press Description LBS LOAD
O-5000LF with 5" cylinder 1900
O-5000LF-4 special 6" cylinder 3800
O-5000LF-6 with 6" cylinder 5500
O-5000LF-8 multi-stage (2) cylinders 8000
O-5000LF-22 with 5" cylinder, 22" inside width 1900
O-5000LF-30 with 5" air cylinder, 30" inside width 1900
O-5000LF-30-4 with special 6" air cylinder, 30" inside width 3800
O-5000LF-10 multi-stage (3) cylinders 10000
*Please Note: Pressure figures @100 PSI Line Input Pressure

 

 

We can customize your Pneumatic Presses to fit your needs, for more information, contact:

Robert Antonelli
rantonelli@fancort.com
(888)-326-2678 x 719