Fancort Logo

Electronics Production Specialist Since 1973

888-326-2678

JR-V2000 Series

...

Main Features

                       
  • Easy Program Teaching
  • Choose from among 10 different display languages
    Switch back and forth among these languages: Japanese・English・German・Italian・Spanish・French・Korean・Simplified Chinese・Czech・Vietnamese.
  • Versatile Multi-purpose Robot
    Add a sensor which sets off an alarm when the workpiece is positioned incorrectly and create monitoring programs to check for errors. With the standard specifications type, use it as a pick-and-place robot, or configure it into a camera-based inspection device. Use the JR-V2000 to automate operations at various places in your manufacturing process.
  • High Repeatability & High Rigidity
    High structural rigidity for excellent precision; position repeatability is ±0.01mm.
  • Choose different measurement units
    Switch between coordinate values displayed in either mm or inches.

JR-V2203 Operating Range : X・Y・Z Axis 200x200x50(mm)

JR-V2303 Operating Range :X・Y・Z Axis 300x320x50(mm) or 300x320x100(mm)

JR-V2403 Operating Range :X・Y・Z Axis 400x400x100(mm)

Dispensing Specifications

  • Excellent Tracking Capability
    High tracking accuracy through CP (continuous path) control; dispense cleanly in circles and arcs, even 3-dimensional dispensing is easy!
  • Joint Robot and Dispenser Unit Control Capability
    Set “Wait Time before Moving” and “Wait Time after Moving” to prevent fragmented dispensing.
    Set “Wait Time before Moving”/ (axes) “Return Amount” /”Return Speed” to prevent stringing.
  • Easy Point Setting for Circular and Arc Line Dispensing
    Just add a “CP Arc Point” (CP=Continuous Path) in between the “Start of Line Dispense Point” and “End of Line Dispense Point” and you can draw an arc that passes through all three points.
    You can draw circles and arcs by setting the “Line Speed” to the “Start of Circle Dispense Point” and a “Circle Angle” to the “Center of Circle Dispense Point”.
  • Comprehensive Dispensing Program
    A wide variety of dispensing jobs, including point dispensing, line dispensing (straight line and arc), rectangular and circular painting are easily programmable.
  • Purging Function
    Automatically purge the dispensing liquid after each dispensing cycle.
    Alternatively, purge whenever you wish with the purge switch.
  • Needle Adjuster Function
    With this optional feature, the robot records the needle tip position in its memory so when it is time to replace the needle it detects and makes corrective adjustments for any position differences that may occur.

Screw Tightening Specifications

                                        
  • Compatible Screw Sizes: M1.0~M2.0
    Tightens screws with a maximum tightening torque of 0.2Nm (2.0kg・cm); high position repeatability allows you to automatically tighten even screws as small as M1.0.
  • Easy Teaching
    With our specialized screw tightening software, programming the robot is easy: just set the screw tightening conditions such as screw length, screw pitch and the locations where you want the screws to go.
  • Screw tightening miss prevention function
    Program the feeder to send a stop signal when it runs out of screws
  • Two screw tightening styles
    With the JR-V2303 and 2403 models, add a second feeder and the robot can tighten two different screw lengths at the same time.
  • Available as a Complete Set
    Screw Tightening Robot Set includes an electric screwdriver and automatic screw feeder unit. Just prepare your workpiece/jigs and you are ready to begin production.

Standard Specifications

                                        
  • Versatile Multi-purpose Robot
    Using the customer-acclaimed JR2000N Series original software JR C-Points, you can run point jobs and use customizing and sequencer functions to operate your robot according to your manufacturing needs. Pairing, pick & place, cutting, testing and more, customize the robot to fit your process!
  • Add I/O, Interfaces
    Add an I/O-1 external input/output, up to 16 inputs/14 outputs are possible. You can also add an RS232C external interface.

For more information, contact:

Bruce Clark
201-396-2968
Catalogue PDF
Request a Quote
Interest
Address
City
Country
Company
(-
Extension
I Need